Jagwire's Straddle Cables With Adjusters are for use on TRP Eurox and Paul Component Engineering cantilever brakes (brakes sold separately). The adjusters fit onto one brake arm and allow you to turn the rubber-coated ends of the adjusters to fine-tune your brake adjustment by tightening/loosening the Straddle Cables (included but not shown in the photo). You get 2 Straddle Cables and 2 Adjusters.
SRAM's Professional Shift Cable System by Gore Ride-On is a nice upgrade shift-cable kit. It boasts 2 cables coated by Gore to be super smooth and their compression-free 5mm-diameter housing. You get ferrules and cable crimps, plus Gore's Grub Seal and MTB Grub Seal, too.
$21.99 - $25.99
Jagwire's Brake Noodles feature stainless-steel tubes with aluminum ends for durability and excellent performance. You get 10 of them for all your bicycle setup needs.
Jagwire's Cable Grips are adapters that make it possible to run hydraulic brake lines on bicycle frames that have housing stops that were designed for regular wire cables and standard housing sections. Once the regular cables and housing sections are removed, the Cable Grips are inserted and tightened in place in the standard frame stops. Then, the hydraulic lines are attached and securely held in place by the gripping jaw(s) of the Cable Grips. The Aluminum model accepts lines up to 5mm in diameter and the lines snap in. The Stainless model grips fully around the lines and is adjustable to fit most diameters.
Jagwire's Inline Index/Detent Adjusters are installed by cutting the front sections of shift housing and inserting them between the two housing pieces to join them again. Once in place, the Inline Adjusters let you fine-tune the shift cable tension by hand, and even while riding, to dial-in your front and rear shifting. You simply turn the knurled center barrels on the adjusters by hand to tighten or loosen the cable tension.
Jagwire's M10 Adjusting Barrel is a 10 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right replacement part for most mountain bike brake levers. It's made of durable metal with a lockring for locking your adjustments. You get a pack of 10.
Jagwire's M6 Adjusting Bolt is a metal adjusting barrel that is the correct replacement adjusting barrel for the cable clips/hangers found on many cable brake systems old and new. It makes it easy to tighten/loosen your brakes without tools. Its 6 x 1.0mm threading fits most clips/hangers and it has a lockring for locking your brake adjustment once it's set. You get a pack of 25.
Jagwire's M7 Adjusting Barrel is a 7 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right part for many older style mountain bike brake levers. It comes in two models and is made of durable metal with a lockring for locking your adjustments. You get a pack of 10.
Jagwire's Road Pro Complete Cable Kit is the perfect way to upgrade your shifting and braking while adding some style to your bike, too, since it comes in many colors. The kit provides everything needed to replace your Shimano or SRAM shift and brake cables including Jagwire's super-smooth Teflon-coated cables and compression-resistant Kevlar-reinforced housing for dramatically improved performance. Plus, with all the small parts included in the kit it's easy to install.
Jagwire's Shift Inner Wire is made of stainless steel and coated with Teflon for excellent corrosion resistance, durability and a super-smooth shift every time. It's a nice upgrade for your shift cables.
$4.99 - $10.99
Jagwire's Shift Inner Wire is a high-quality shift cable made of stainless steel for excellent shifting performance, corrosion resistance and durability. It also comes in lengths to fit single and tandem bicycles.
$14.99 - $16.99
Jagwire's Sport Inline Adjusters are installed on your shift cable housing sections so that you can fine-tune the shift cable tension by hand (without tools). They're great for keeping your shifting dialed in. They're precision made of lightweight aluminum and nylon for easy use and durability. To install them, remove the cables and housing sections, cut the top housing sections in two and rejoin the sections with the Inline Adjusters in the middle.
$5.49 - $13.99
Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.
Jagwire's Straddle Cable Carrier is for cantilever and centerpull brakes. It attaches to the end of the brake cable and is what the brake's straddle (also called transverse or crossover) cable attaches to. The Straddle Cable Carrier is made of light, corrosion-resistant and durable aluminum with a steel bolt. You get a pack of 10.
Jagwire's V-Brake Boot covers and seals the points where the the cable on your V-Brakes, linear-pull and direct-pull brakes enter the noodle. It's made of flexible rubber to seal the cable and help keep dirt, grit and moisture from entering. It keeps your cables and brakes working nice and smooth and ensures your cables last as long as possible. You get a bag of 10.
$1.99 - $51.74
- Aluminum and brass ferrules to finish cable housing - Cable end crimps for derailleur and brake cables - Cable Os for frame protection
- Vision Aero/reverse brake lever specific brake cable - Replacement cables that only work with Vision reverse brake levers - Sold individually
• 50 feet (15.2 meters) length • 5mm diameter brake cable housing
• Multi-strand construction • Length: 25 feet • Size: 4mm
$4.99 - $5.99
- Complete cable kits for internal three speed hubs
- Rubber - Color: Black
Shimano Stainless Derailleur Cables Cable Head: Shimano/SRAM Cable Type: Stainless Defined Color: Gray Diameter: 1.2 Double Ended: No Length: 3000 mm Quantity Included: 1
Shimano Stainless Road/MTB Brake Cable & Housing Sets - 1 x 2000mm black 5mm housing - 1 x 1000mm and 1 x 2050mm 1.6mm stainless cables - 2 end caps and 2 cable crimps
- Wet or muddy condition cable sealing solution
Shimano XTR OT-SP41 Polymer Coated Derailleur Cable Sets
$5.00 - $6.00
- Cables Are Pre-Stretched & Polished Smooth To A 1.5mm Diameter Finish - Available In Both Stainless & Galvanized Steel - Comes With 1350mm & 2350mm Cable Lengths For Both Front & Rear Brakes - 3000mm Of Black 5mm Cable Housing - 3 Sets Of Donuts - 6 Black CNC Alloy Ferrules - Cable Hooks - 2 Anodized Silver Alloy End Caps
$5.00 - $6.00
- Cables Are Pre-Stretched & Polished Smooth To A 1.1mm Diameter Finish - Available In Both Stainless & Galvanized Steel - Comes With 15000mm & 2100mm Cable Lengths For Both Front & Rear Derailleurs - 2800mm Of Black 4mm Cable Housing - 6 Sets Of Donuts - 9 Black CNC Alloy Ferrules - Cable Hooks - 2 Anodized Silver Alloy End Caps - Rubber Shielding
$43.90 - $99.90
- Brake casing has internal lining and external plastic coating - Derailleur casing is compressionless with internal lining and external plastic coating
- Aluminum cable-end crimps for derailleur or brake applications to prevent fraying after the final cut
SRAM's Cable Housing/Hydraulic Line Rotating Hooks secure your cable housings to hold them the way you want them, keep them from hitting each other and making rattling noises, and they provide a tidy custom look, too.
Page 1 of 5 Next page